Hughes 9201 BGAN
Click Here for information about the Hughes 9502 C1, D2 BGAN for Use in Flamable and Hazerdous Environments Hughes 9502 C1, D2 BGAN

Inmarsat satellite bandwidth

Hughes 9502 M2M Integrated One Piece BGAN

The world's most advanced, all-IP, BGAN machine-to-machine satellite terminal with integrated antenna and highest IP-66 ingress protection industry rating for outdoor installation

Thisone-piece terminal was introduced by Hughes as an alternative to the external antenna version of the 9502, thisBGAN system integrates the 9502 modem with a compact antenna to create a single-piece, integrated, rugged terminal to withstand the most extreme weather conditions.

The exceptional low power consumption (<1 W idle) of the Hughes 9502 makes it possible to provide end-to-end IP connectivity to sites that are off the grid. This breakthrough provides end-to-end IP connectivity to power-challenged locations that rely upon solarbattery arrays involving sensitive power budgets.

Download the Hughes 9502 Integrated BGAN PDF Here

Download the Hughes 9502 Integrated Terminal User Guide Here

  • No minimum connection charge
  • Minimum billing increment of 1 Kbyte
  • No usage charge for over-the-air modem software upgrades
  • Integrated IP Watchdog to ensure "always-on" network connectivity. No manual intervention required to recover from an outage
  • Auto-on/auto-context activation automatically restores power and PDP connection to itself following loss of power and/or IP connection
  • Remote control via SMS provides management platform for command and control to the terminal using SMS, including configuration, debugging, and remote access to Web interface
  • Ultra-low power consumption
    • Idle: < 1W
    • Transmit; < 20W
    • Receive: < 3W
  • Relay mode passes WAN IP address to the RTU
  • Security enhancements with extended layers of embedded security options
  • Basic installation; no PC required
  • Built-in GPS receiver
  • The Hughes M2M terminal is BGAN M2M Certified
  • Interfaces
    • Ethernet connection (RJ45)
    • USB Type B for connection to PC for configuration of terminal
    • RS-232 (DB9) to external NMEA 0183-based GNSS device (e.g., GLONASS receiver)
  • Package Contents
    • Hughes M2M Terminal
    • Locking bar for padlock
    • Mounting screws and washers
  • Accessories
Hughes-9502-Integrated-BGAN-terminal
Hughes 9502 Integrated Terminal
Hughes-9502 BGAN Integrated terminal azimuth adjusting bracket
Azimuth/Elevation Bracket
Hughes 9502 Integrated BGAN terminal rear view
Rear View
Hughes 9502 BGAN integrated terminal bottom view with cap off
Bottom side view with end cap off