Hughes 9201 BGAN For Use in Flamable and Hazerdouus Environments

Click Here for information about the Hughes 9502 Imtegrated BGAN

Inmarsat satellite bandwidth

Hughes 9502 C1-D2 IP BGAN

The world’s most cost-effective, all-IP BGAN machine-to-machine satellite terminal with exceptionally low power consumption - rated for use at Well Sites, Refineries, and Hazerdous Materials Storage Facilities.

The Hughes 9502 C1-D2 IP BGAN satellite terminal provides reliable connectivity over the Inmarsat Broadband Global Area Network (BGAN) for IP SCADA and machine-to-machine (M2M) applications.

The Hughes 9502 terminal (P/N 3500509-0004) is suitable for use in the following hazardous locations:

  • Class 1, Division 2, Groups A,B,C,D
  • ATEX Group II, Category 3

The Hughes 9502 C1-D2 has the following interfaces:

  • Ethernet connection (RJ45)
    USB 1.1 connection (USB Type-B) for PC to configure terminal (requires installation of Hughes USB driver. See www.bgan.hughes.com )
  • TNC type RF connector on IDU and N-type RF connector on the ODU
  • Integrated GPS receiver and L-band ODU
  • RS232 serial interface (DB9 male, DTE) to external NMEA 0183 based GNSS device (e.g., GLONASS receiver). This port cannot be used for serial data.
  • 3 LED status display and a single function button
  • 3.5 mm stereo audio jack for audio tone or voltage level to assist in ODU pointing
  • USIM card slot behind SIM door

The Hughes 9502 Kit is a two piece design that comes with an Indoor Unit (IDU), an Outdoor Unit (ODU) and a 10 meter RF cable that has an N type connection at both ends and an N to TNC adapter inside the cable bag for connection to the IDU.

Download the Hughes 9502 BGAN PDF Here

Download the Hughes 9502 C1-D2 Complient Terminal User Guide Here

  • No connection charge with BGAN M2M(normal BGAN charge is 100 Kbytes)
  • Minimum CDRs only 1 Kbyte (normal BGAN charge is 10 Kbytes)
  • No charge over-the-air modem software upgrades
  • Exclusive airtime packages unique to the Hughes 9502
  • Integrated IP Watchdog to ensure "always-on" network connectivity. No manual intervention required to recover from an outage
  • Auto-on/auto-context activation automatically restores power and PDP connection to itself following loss of power and/or IP connection
  • Remote control via SMS—remote management platform for command and control to the terminal using SMS, including configuration, debugging, and access to Web interface
  • Ultra-low power consumption
    • Transmit: < 20 W
    • Narrow beam w/o transmit: 3 W
    • Idle (regional beam): < 1 W
    • Off (wake on packet): < 10 mW (@ 12 Vdc)
    • Off (wake on packet): < 30 mW (@ 24 Vdc)
    • Off (GPIO control): 0 W
  • Relay mode passes WAN IP address to the connected RTU
  • Security enhancements with extended layers of embedded security options
  • Basic installation; no PC required
  • Outdoor unit (ODU) can be pole mounted
  • Indoor unit (IDU) is housed inside building or the remote terminal unit (RTU)
  • Built-in GPS receiver
  • Interfaces
    • Ethernet connection (RJ45)
    • USB–Type B for connection to configuration PC
    • RS-232 (DB9) to external NMEA 0183-based GNSS device (e.g., GLONASS receiver)
    • TNC connection on the IDU to the external antenna
  • Package Contents
    • Hughes 9502 BGAN M2M Terminal IDU
    • 10 meters RF antenna cable
    • External antenna (ODU)
  • Accessories
Hughes 9502 M2M BGAN Terminal
Components:
Transceiver
Transceiver
10 Meter RF Cable
10 Meter RF Cable
Flat-Panel Antenna
Flat-Panel Antenna