| •
MultiPath architecture for easy integration with existing
voice and data infrastructure, meaning little or no re-programming
of the PBX, or upgrades are required and no need for special
dialing plans.
• Transparent MultiPath Call Routing to
intelligently route calls between the PBX, the PSTN, and
the IP network to achieve the best combination of cost
and quality. The Tenor can also route calls over IP to
reduce costs, and then transparently "hop off"
to the PSTN, to reach off-net locations.
• PacketSaver™ Technology multiplexing
to reduce bandwidth consumption by up to 57% by combining
voice packets from multiple calls into a single packet.
• Universal Dial Plan that provides a
programmable dial plan for Tenor to be integrated into
any network environment.
• Auto Provisioning interface allows the
Tenor solution to be deployed worldwide, and configured
automatically by acquiring the configuration information
from a central server, upon installation. The same auto-provisioning
capability allows the Tenor to be configured from a VoIP
application, thus supporting a single user interface between
the VoIP application and the Tenor configuration.
• Unified Communications Proxy (UCP) provides
'Any to Any' connectivity: SIP-SIP, TDM-TDM and SIP-TDM,
for easy integration with any network.
• NATAccess™ to allow Tenor to operate
behind NAT firewalls to translate internal IP addresses
into public addresses when a VoIP call is established
with an outside party.
• Remote Management for anywhere, anytime
remote management even behind NAT firewalls with Quintum's
Remote Management Session Server.
|
|
| CALL
MANAGEMENT FEATURES
• Answer and Disconnect Supervision
• Trunk group support
• Public and private dial plan support
• User programmable dial plan support
• Forced IP routing and IP port mapping
• Pass-through support for calls to Toll-free, local and
special service numbers (ie. emergency services, etc.)
• Automatic appending and stripping of digits to dialed
numbers
• Call Detail Records
• Least Cost Routing with external Quintum VoIP Call Routing
Server*
• Type 1 Caller ID/Name Support (Telcordia, ETSI, NTT
and DTMF)
TECHNICAL
SPECIFICATIONS
Telephony
Specifications
• Voice algorithms: G.723.1a, G.711
• Auto codec negotiation
• Modem over IP
• Choice of 8, 16, or 24 FXS and/or FXO configurations
or a 48 FXO only configuration
• Standard 50 pin RJ-21 Telco connectors
• Coding: A-law, -law
• Enhanced (Carrier Grade) Echo Cancellation: ITU Rec.
• G168, up to 128 msec tailsize
• Loop Start, Reverse Battery, Battery Disconnect
• Tandem/TDM switching
• Maximum Call Rate: 1,800 calls/hour
IP
Network Specifications
• LAN Interface: Fast Ethernet port (10/100 Base-T)
• Standard RJ-45 Interface (IEEE 802.3) for 10 Base-T
or 100 Base-T connections
• DHCP Client
• QoS Support: IP TOS, DiffServ
VoIP
Network Specifications
• SIP User Agent
• SIP RFC2833 for DTMF signaling
• SIP Supplementary Services
• SIP Refer Method Support
• Message Waiting Indicator
• Adaptive Voice Activity Detection (VAD) with Comfort
• Noise Generation (CNG)
• Adaptive Jitter Buffer
• Packet Loss Compensation
• NATAccess™ - NAT/Firewall
• Security: IP Filtering
• Up to 48 simultaneous VoIP calls
• Support for DNS-SRV
• Survivability - (Option only available in AXM, AXT and
AXE Series)
Configuration/Management
• Auto-Provisionable • Quintum Tenor Configuration Manager
(GUI) for configuration of remote
individual Tenors.
• Quintum Tenor Monitor (GUI) for alarm monitoring, call
monitoring and CDR monitoring
• Remote access with external Remote Management Session
Server
• SNMPv2 Agent
• Command Line Interface
GENERAL
SPECIFICATIONS
Dimensions:
1U High Chassis
• W 17 3/8" x H 1 3/4" x D 10 3/4"
• W 44.5cm x H 4.5cm x D 27.6cm
• Maximum weight: 10 lbs. (4.55kg)
• AC Power: 100-240 Volts AC, 50/60 Hz, 60 watts
• Operating temperature: 40 - 104 F (5 - 40 C)
• Operating humidity: 20% - 80% non-condensing
• Telco: FCC Part 68, TS-016, TBR4, TS-038, CS03
• EMC: FCC Part 15 EN55022, EN55024,
• EN61000-2-3, EN61000-3-3, AS/NZS3260
• Safety: UL60950, EN60950, AS/NZS60950
|
