Broadband mobile satellite Voice over IP VOIP solution for satellite Internet

Quintum VoIP Products

2, 4, 6 or 8 Analog line and trunk interfaces
Up to 8 simultaneous VoIP calls
Available in MultiPath or Gateway configurations
Auto-Provisionable
Unified Communications Proxy (UCP)
Supported by Remote Management Tools
Perfect for small businesses,SOHOs and branch office locations

Download the Quintum Tenor AF Series .PDF Here

The Quintum® Tenor® AF Series gives small businesses, SOHOs and branch offices with analog voice infrastructures an easy, cost-effective way to capitalize on the power of Voice over IP (VoIP).

• MultiPath architecture for easy integration with existing voice and data infrastructure, meaning little or no re-programming of the PBX, or upgrades are required and no need for special dialing plans.

• Transparent MultiPath Call Routing to intelligently route calls between the PBX, the PSTN, and the IP network to achieve the best combination of cost and quality. The Tenor can also route calls over IP to reduce costs, and then transparently "hop off" to the PSTN, to reach off-net locations.

• PacketSaver™ Technology multiplexing to reduce bandwidth consumption by up to 57% by combining voice packets from multiple calls into a single packet.

• Universal Dial Plan that provides a programmable dial plan for Tenor to be integrated into any network environment.

• Auto Provisioning interface allows the Tenor solution to be deployed worldwide, and configured automatically by acquiring the configuration information from a central server, upon installation. The same auto-provisioning capability allows the Tenor to be configured from a VoIP application, thus supporting a single user interface between the VoIP application and the Tenor configuration.

• Unified Communications Proxy (UCP) provides 'Any to Any' connectivity: SIP-SIP, TDM-TDM and SIP-TDM, for easy integration with any network.

• NATAccess™ to allow Tenor to operate behind NAT firewalls to translate internal IP addresses into public addresses when a VoIP call is established with an outside party.

• Remote Management for anywhere, anytime remote management even behind NAT firewalls with Quintum's Remote Management Session Server.

2 Port FXS - AFG200	2 Port FX0 - AFT200
4 Port FXS - AFG400	4 Port FX0 - AFT400
8 Port FXS - AFG800	8 Port FX0 - AFT800

CALL MANAGEMENT FEATURES

• Answer and Disconnect Supervision
• Trunk group support
• Public and private dial plan support
• User programmable dial plan support
• Forced IP routing and IP port mapping
• Pass-through support for calls to Toll-free, local and special service numbers (ie. emergency services, etc.)
• Automatic appending and stripping of digits to dialed numbers
• Call Detail Records
• Least Cost Routing with external Quintum VoIP Call Routing Server*
• Type 1 Caller ID/Name Support (Telcordia, ETSI, NTT and DTMF)

TECHNICAL SPECIFICATIONS

Telephony Specifications
• Voice algorithms: G.723.1a, G.711
• Auto codec negotiation
• Modem over IP
• Choice of 2, 4, 6 or 8 FXS and/or FXO configurations
• Standard RJ-11 connectors
• Coding: A law, µ law
• Enhanced (Carrier Grade) Echo Cancellation: ITU Rec. G168, up to 128 msec tailsize
• Loop Start, Reverse Battery, Battery Disconnect
• Tandem/TDM Switching
• Maximum Call Rate: 900 calls/hour

IP Network Specifications
• LAN Interface: Fast Ethernet port (10/100 Base-T)
• Standard RJ-45 Interface (IEEE 802.3) for 10 Base-T or 100 Base-T connections
• DHCP Client
• QoS Support: IP TOS, DiffServ

VoIP Network Specifications
• SIP User Agent (RFC3261 compliant endpoint)
• SIP RFC2833 for DTMF signaling
• SIP Supplementary Services
• Message Waiting Indicator
• SIP Refer Method support
• Adaptive Voice Activity Detection (VAD) with Comfort Noise Generation (CNG)
• Adaptive Jitter Buffer
• Packet Loss Compensation
• NATAccess™ - NAT/Firewall
• Security: IP Filtering
• Up to 8 simultaneous VoIP calls
• Support for DNS-SRV

Configuration / Management
• Auto-Provisionable • Quintum Tenor Configuration Manager (GUI) for configuration of remote individual Tenors.
• Quintum Tenor Monitor (GUI) for alarm monitoring, call monitoring and CDR monitoring
• Remote Access with Remote Management Session Server • SNMPv2 Agent
• Command Line Interface

GENERAL SPECIFICATIONS

Dimensions: 1U High Chassis
• W 8 1/4" x H 2" x D 7"
• W 21cm x H 5.1cm x D 18.73cm
• Maximum weight: 1.3 lbs. (0.6kg)
• AC Power: 100-240 Volts AC, 50/60 Hz, 22 watts
• Operating temperature: 40° - 104° F (5° - 40° C)
• Operating humidity: 20% - 80% non-condensing
• Telco: FCC Part 68, AS/ACIF S003, CS03, JATE AS/ACIFS002:2001
• EMC: FCC Part 15 Class B, EN55022, EN55024, EN61000-2-3, EN61000-3-3, AS/NZS3260
• Safety: UL60950, EN60950, AS/NZS60950


*Thousands of satellite systems installed since 1997*
Satellite Home \| Coverage Area \| Order \| Fixed Satellite Internet \| Mobile Satellite Internet \| Mobile Satellite TV Marine Satellite TV & Internet \| FlyAway Internet \| Service Plans \| VPN Virtual Private Networking \| VoIP Voice over IP Satellite Phones \| Telular \| BGAN \| Technical Support \| Satellite Installer Training \| Downloads

Fixed and Mobile Satellite Internet Service