DataStorm J1 Technical Specs

Mechanical

Weight:

2.0 Lbs (.9 Kg)

Dimensions:

1.85 H X 11.0 W X 7.5 D Inches
47 H X 279 W X 190 D (millimeters)

Connectors:
Power - 3 Pos, 5.08mm, Male Header Horizontal PCB (Green Euro Style)
Mates with;
On Shore Technology EDZ950/3
Terminal Block Plug Female 3 Pos 5.08mm

Control - 9 Pos, 5.08mm, Male Header Horizontal PCB (Green Euro Style)
Mates with;
On Shore Technology EDZ950/9
Terminal Block Plug Female 9 Pos 5.08mm

Serial - 3 Pos, 3.81mm, Male Header Horizontal PCB (Green Euro Style) GPS Mates with;
On Shore Technology EDZ1550/3
Terminal Block Plug Female 3 Pos 3.81mm

LAN – RJ45 Ethernet Connection
Mates with;
Standard RJ45 Male Connector to Router
Crossover LAN when connected directly to PC

LNB In – F Connector, Female
Mates with;
F Connector, Male, Coax (to dish mount)

LNB Out – F Connector, Female
Mates with;
F Connector, Male, Coax (to modem)

SD Card – SD/MMC Card Slot (Front Panel)
Mates with;
Standard SD/MMC Memory Card (up to 4 GB)

Electrical

Power:
Input 12VDC to 15VDC (3 Pin Euro)
4.8 to 8.6 Amps

Motor 5 VDC to 15 VDC (9 Pin Euro)
Az, El, Sk
up to 8 Amps

Dish Mount 12VDC to 15VDC (9 Pin Euro)
1 Amp Max.

LNB 13VDC/18VDC
750 mA

Power Consumption

Off 0 Amps 0 Watts
Standby .7 Amps 10 Watts (On Satellite)
Dish Search 3 Amps 45 Watts (Dish Moving)
Max Power 8.6 Amps 130 Watts (Dish Stall) (Power Supply Rated)

Communications

CAN Bus half duplex (Dish Mount) (9 Pin Euro)
Serial Port RS232 Output Only (NEMA 0183) (3 Pin Euro)
4800 Baud 8N1, no flow
Limited Diagnostic Port
LAN Port 10BaseT/100BaseT Auto negotiate (RJ45)
DiSEqC LNB Switching (LNB RF In) (F Conn)
Halt/Count Bi-directional (Dish Mount) (9Pin Euro)
SD/MMC SD/MMC Card Memory (Front Panel)

RF Ports

LNB Input 950MHz to 2150MHz (L Band Input)
13VDC/18VDC/DiSEqC/22KHz (LNB Control)

LNB Output 950MHz to 2150MHz (L Band Pass Thru)
(LNB DC Power Pass Thru)

Temperature:

Operational 32F to 132F (0 C to 55 C)
Storage -30F to 158F (-35 C to 70 C)