Specifications

Reflector Type....................... .75 Effective Area Elliptical Offset

Mount Geometry......................3 Axis Motor Drive (Elevation, Azimuth & Skew)

Polarization.............................Dish Rotation Cross-Pol Isolation

Deployment Sensors.................GPS, Compass + 2 degrees & Tilt Sensor + 1Degree

MAXIMUM MOUNT ROTATION

Azimuth...................................375º
Elevation.................................170º
Polarization..............................+ 55º

SPEED

Deploying Elevation...................120º in 30 seconds
Deploying Azimuth.....................180º in 30 seconds
Peaking...................................1º per second (Typical acquisition time 4 to 7 minutes)

RF INTERFACE

LNB for Satellite TV....................2qty RG6 for dual TV receiver (optional)
Transmit and Receive Cable.........2qty RG6 for Transmit and Receive
Transmit Power.........................2-25 Watts

POWER REQUIREMENTS

12V DC 4 (DC Power Supply Included)

DIMENSIONS OF DISH

Mounting Plate............................21 3/4" x 48"
Dish Stowing Extended Dimensions..53" long by 39" wide by 10.5" height
Deployed Height..........................48" max height
Weight......................................80 lbs.

ENVIRONMENT

Wind Deployed............................60 mph
Wind Stowed..............................140 mph
Temperature...............................Operational -20 F. to 125 F.

J14 CONTROLLER

Dimensions.................................1.85 H X 11.0 W X 7.5 D Inches
Controller Voltage........................12V DC to 15VDC 1 Amp Max.